Re: sanning veneer

On Jun 30, 11:39 pm, Smaug Ichorfang <s...@[EMAIL PROTECTED]
> wrote:
> bridgerf...@[EMAIL PROTECTED]
 wrote in news:d3d9b7d5-1636-4c3b-9f1a-1b4cf7955422
>
> > card scraper.
>
> How do you hold a 1/16 thick piece of wood to scrape it?  And if you use
> double-sided tape to hold it down, how do you get it back up again w/o
> splitting or otherwise ruining the wood?

One way to do it is to cut one piece of veneer on the bandsaw then run
the stock through the jointer or thickness planer to smooth out the
face before running the stock through the bandsaw again.  Then you can
glue the smooth face down and deal with the rough face later with a
sander/scraper.

R