"Tsunami" <nononono@[EMAIL PROTECTED]
> wrote in message
news:y-qdnVywwNNAU5jVnZ2dnUVZ_t2inZ2d@[EMAIL PROTECTED]
>
> "Larry Farrell" <farrlarr@[EMAIL PROTECTED]
> wrote in message
> news:3d592$48053e83$1424@[EMAIL PROTECTED]
>> Tsunami wrote:
>> [snip]
>>
>> >
>> > Huh? My Q'n was about HeliPro blackhawk500 spares and if the model is
> made
>> > anymore?
>> > I think something funny is happening in newsreaderland or on google
> groups
>> > or whatever as replies are under the wrong thread I think
>> >
>> >
>> >
>>
>> I just Googled it and found the following address for the copter.
>>
>> >
>>
>
http://www.rcbestseller.com/catalog/product_info.php/manufacturers_id/4/products_id/338
>>
>> And the following for replacement parts.
>>
>> > http://www.nitroplanes.com/hebl500repa.html
>>
>> Found both in about 20 seconds.
>> ** Posted from http://www.teranews.com
**
>
> Yes I know. But many sellers are out of some parts, and the heli kit is
no
> longer listed at most of them
> I can use google and find spare parts.... I want to knwo if anybody
> *knows*
> that the model is discontinued or *knows* that the parts supply problem
is
> only brief
Y'know, it's entirely possible for things like main shafts, feathering
spindles, drive gears, clutches, rotor heads, tail rotor gearboxes,
blades,
tail booms, undecarriages etc to find their way onto different
manufacturers
heli's.
This may be a slightly complicated hobby, but it's not rocket science and
a
10mm shaft from one heli can EASILY be made to fit a heli the needs a 10mm
shaft. You can even buy shaft material at engineers suppliers.
I can't remember the last time I bought a manfacturers shaft for ANY
helicopter. Silver steel (and that's all you need) comes in a variety of
diameters, from 1.5, all the way to 20mm if you look hard enough.
Do some "modelling", after all, that's what this hobby is.
--
Beav
VN 750
Zed 1000
OMF# 19
|
