by "William R. Mattil" <wrmattil@[EMAIL PROTECTED]
>
Jul 3, 2008 at 11:07 PM
Jim wrote:
> You need a 70mm fan unit. A 3800-4500KV inrunner brushless motor that
will
> fit in the fan unit. You will need at least a 60A ESC and you will need
to
> run it on 4S-6S Lipos to get the speed you need. Be sure the motor and
ESC
> can handle the voltage!
>
> The instructions are atrocious. This airplane is a B-I-T-C-H to
> build...trying to get the servo leads, power leads, etc. from the back
to
> the front of the fuselage.
>
> I have built one but have yet to fly it.
>
>
Jim,
What motor and Batt's did you end up using ?
Regards
Bill
