Re: Saito 91 Starting

Are you using an electric starter?  I always use my favorite method, 
which is to fill the tank, then start cranking with the electric starter 
and tap my thumb over the exhaust a few times until the fuel gets all 
the way to the carb.  I always have great results this way with any glow 
engine, 2 stroke or 4.

If you're starting a new engine you can put a drop or two of oil in the 
plug hole first, in case you don't like the idea of cranking a new, dry 
engine.



Carl Anderson wrote:
> What is the proper procedure for starting from cold a Satio 91 engine.
> Before break in it says to prime 5 to 6 turns on the prop while covering
the 
> exaust.
> My engine is broken in ,but it does not always start easily.(But it runs

> fine)
> Will it still need priming or should I puug in the battery and start 
> cranking it over?
> Thank you
> Carl Anderson 
> 
>