by "SteveB" <toquerville,utah@[EMAIL PROTECTED]
>
Apr 28, 2008 at 08:43 AM
"Ron Anderson" <ron@[EMAIL PROTECTED]
> wrote
>>
> Ok That could be many things.
> To start with the needle threads left to right. Always pull at least 6
> inches of thread from both the needle and bobbin when you start. It will
> shrink as the machine takes up slack. Hold the ends until you gat a
couple
> stitches.
> Also be sure the position finger on the bobbin case is locked in the
> needle plate groove. It is common to miss that when putting the needle
> plate back on.
> When you pull the needle thread with the foot down you should feel a
> substantial resistance and a very light resistance on the bobbin thread.
>
> --
> Ron Anderson A1 Sewing Machine
> 18 Dingman Rd Sand Lake, NY 12153
> http://www.a1sewingmachine.com
>
>
>
Roger on everything. Will just have to keep trying.
Steve
