kater2345 wrote:
> kater2345 had written this in response to
>
http://www.sewgirls.com/textiles/Re-HELP-CAN-T-RAISE-BOBBIN-THREAD-3487-.htm
> :
>
> Trish Brown wrote:
>
>> kater2345 wrote:
>>> I have tried everything short of standing on my head and still
>>> can't
>>> get the bobbin thread to raise. I have changed my needle,
>>> adjusted the
>>> top thread tension both ways, re-threaded the machine many times,
>>> changed bobbins and rethreaded it twice, and read the book cover
>>> to
>>> cover.
>>> any suggestions would be very helpful. I have a brand new (only
>>> used
>>> once before now) Singer Inspiration 4220/4228. please help
>>> asap!!!!
>>>
>>> -------------------------------------
>
>
>> Short of there being a mechanical problem with your machine, I can only
>
>> suggest that you make sure the two tails of thread are about four
>> inches
>> long and *hang onto them* while you lower and raise the presser foot.
>> Perhaps they're getting pulled down into the bobbin case?
>
>> If that doesn't help, then post again and describe exactly what happens
>
>> when you try to raise the bobbin thread. Someone here will be able to
>> help. ;-D
>
You shouldn't need to press on the foot pedal. Raising the bobbin thread
should happen as you gently turn the flywheel a turn or two
(needle-down, needle-up) while holding the end of the needle thread.
(Sorry: you don't hold onto *two* threads as I said earlier, you hold
onto the *one* that comes from the needle, drawing it between the 'toes'
of the presser foot and hanging onto its end as the needle goes down and
then up).
NB. The flywheel is the big one at the upper right hand end of the machine
I'd hope there's nothing wrong with the timing of your machine. You'd
have to be pretty unlucky for that to have happened. Maybe you've made a
small error in threading? Did you wind your bobbin as per instructions?
Have you got just a short length of bobbin thread sticking out? (2"-4")
Most new machines come with complimentary lessons. Why don't you contact
your local Singer centre and see what they're prepared to offer you? If
nothing else, surely a kindly shop assistant will show you how to thread
the machine correctly and get started. Most sewing folk are really
helpful in that way. I'm not familiar with your machine model (my own
Singer is hitting forty years old - euwww!), but most problems are
common to all machines. Keep trying! The mistakes we make at the
beginning are the best lessons we learn! :-D
--
Trish {|:-} Newcastle, NSW, Australia
|
