RBM wrote:
>
> "Scott" <golden@[EMAIL PROTECTED]
> wrote in message
> news:487FA824.DFCB7CC6@[EMAIL PROTECTED]
> > I'm replacing a 30-year old electric Frigidaire drop-in stove with a
new
> > Kenwood
> > electric drop-in. The old stove has a 220v electrical input consisting
of
> > a black
> > wire, a black wire with a red stripe, a grey wire and a ground wire. I
> > believe the
> > man at the Sears store said that new stoves have two wires, plus a
ground
> > wire.
> > What's the proper way to hook up the wiring?
> >
> > Thanks!
> > Scott
>
> Your old stove was connected to two hot legs, which were the black and
black
> with red tracer, a neutral which was the gray, and a ground, which was
green
> or bare. The new stove does not use a neutral, so cap that wire and just
use
> the two hot legs and the ground. Typically a stove does use both neutral
and
> ground, but often cooktops (unit with no oven) do not
RBM,
As it turned out, the new stove came with a black wire, a red wire, a
neutral
wire, and a green wire (the ground). So we matched it up with the original
setup, and it works great!
Scott
|
