I am still somewhat new to all this so pardon the newbie questions...
I have 2 manual controllers, a CMA11, a number of modules (light and
applicance), and a couple switches (XPS3 alone and with XPSS or WS14A)
installed in my house. Generally, these work well and as expected.
However, I am trying to debug an occasional issue so I am running my
ActiveHome (v 1.3) connected to my CMA11 and watching the communications
log.
In so doing, I am using my manual controllers - an MC460 and a Radio
Shack mini controller timer - to turn units on and off. When I do this,
I do not see any activity in the communications log for the device which
is supposed to be controlled (B 1-4). Instead, I always see an M13
followed by an M All Units Off with each controller action (both off and
on actions). This seems odd to me:
(a) Why don't I see something in the log for the B1 device I am turning
on and off? The unit does indeed go on/off.
(b) Why am I seeing any activity on the M house code when all the
controllers are set to B?
I must be missing something obvious.
Thanks,
David
|
