Re: Computer Control over Leviton Green Series Components

http://www.smarthome.com/manuals/4289&4292.pdf

"Cat. Nos. HCMØ6 and HCM1Ø can be operated manually as a standard type
dimmer. The module may be set to any of 256 address codes, to be selected
at
the time of installation. The desired address is set by depressing and
holding the recessed button until the ON/OFF LED flashes. The code is then
learned from any transmitter when it sends the DHC command."

"Anthony R. Gold" <not-for-mail@[EMAIL PROTECTED]
> wrote:

>Has anyone experience of controlling devices in the Leviton Green series?
>
>This home uses wall switches such as dimming wall switch controllers
>HXC7S-1TW with dimming wall switch receivers HXM06-1TW to set scenes.
>
>Monitoring the power line X10 signals using an ACT monitor I see power
>line signals such as: K[1]012636 for scene 1 and K[1]01BE36 for OFF and
>when I use ACT's free Logger Interface software with one of their
computer
>interface controller I can enter those same strings to correctly generate
>the appropriate scene commands.
>
>I have two problems: first I would like to control the individual lights
>and not only use the set scenes, and second I do not know how to have
>Homeseer software generate a K[1]012636 sequence, even if I was happy to
>live only with the scenes already set into the wall controller buttons.
>
>Any help or advice will be greatly appreciated.
>
>Tony